10Base-FL ST/SC Multi/Single-Mode <> 10Base-T RJ-45 Ethernet Converter

OVERVIEW The transceiver equips with a RJ-45 and an AUI DB-15 Male connector that provides a connection from an AUI to 10Base-T network. By using the TEM0200 Transceiver, it is a simple, cheap, and flexible way to attach devices on different kinds of LAN media. Diagnostic and status LED indicators are equipped on the front panel. TEM0200 is fully compiled with FCC Part 15 Class B standard

DEVICE DRIVERS SUPPORTED

TECHNICAL SPECIFICATIONS

• Model:TEM0200
• Standards:IEEE 802.3 10Base-T
• Connector:
  RJ-45 TP modular jack, and
  DB-15 male AUI connector for direct attached or used with transceiver cable
• Cable and Limitations:Transceiver Cable - up to 50m (165ft)
  TP Cable - Cat 3 or Cat 5, up to 100m (328ft)
• Data Transfer Rate: 10Mbps
• Diagnostic LEDs: POL, LNK, TX, RX, PWR, COL, JAB

  LED	COLOR	FUNCTION
  POL	Yellow	Lit when auto-polarity is active
  LNK	Green	Lit when TP cable connection is good
  TX	Green	Blinks when transmission is present
  RX	Green	Blinks when receiving is present
  PWR	Green	Lit when +12V power is coming up
  COL	Yellow	Blinks when collision signal is present
  JAB	Yellow	Lit when transmission onto time out

• SQE Test: DIP Switch selectable
• Humidity: 5% to 90%
• Ambient Temperature: 0° to 50° C
• Power Requirement: 0.2A@+12V DC via AUI port
• Dimensions: 22 x 44.5 x 67 mm (H x W x D)
• Compiles with FCC Part 15 Class B and CE Mark