HXR004C & HXR004T

Catalogue

Bargain offer

Data Sheets

Product assistant

Technologies

HXR004C & HXR004T

4-Port 100Base-FX Multi-Mode Rack-Mountable Switch

OVERVIEW

HXR004FX is a 4-port Fast Ethernet fiber optics switch that complies with IEEE 802.3u and 802.3x 100Base-FX standards. It is ideal for small workgroup to set up a 100Base-FX network and for 4 distant 100Base-FX network linking together over fiber optics cable.

HXR004T is equipped with ST Tx/Rx connectors while HXR004C is equipped with SC Tx/Rx connectors. HXR004M is equipped with MT-RJ small form factor fiber optics connector. The maximum cable length can be up to 2 km in full-duplex mode for multi-mode cable. Each port is equipped with Link/Activity, 100Mbps, and Full-duplex/Collision diagnostic LEDs. Power LED clearly indicates the status of electric power. Each port is switch selectable for full- or half-duplex.

HXR004T

DEVICE DRIVERS SUPPORTED

Filename: n/a
Included Drivers:n/a

TECHNICAL SPECIFICATIONS

Model:	HXR004C/ HXR004T
Standards:	IEEE 802.3u and 802.3x 100Base-FX
Network Connector:	HXR004C 4 100Base-FX SC Tx/Rx Multi-Mode Connectors HXR004T 4 100Base-FX ST Tx/Rx Multi-Mode Connectors HXR004M 4 100Base-FX MT-RJ Small Form Factor Multi-Mode Connectors
Transmission Mode/Speed:	100Mbps Full- or Half-Duplex
Transmission Method:	Store and Forward Switching
Packet Forwarding/Filtering Rate:	148,800 packets/sec full wire rate on 100Mbps forwarding and filtering
MAC Address and Self-learning:	Up to 12K
Buffer Memory:	1024KB for 8 ports
Flow Control:	IEEE 802.3x compliant for full-duplex Back-pressure flow control for half-duplex
Cable and Maximum Length:	50/125, 62.5/125, or 100/140µm multi-mode up to 2 km
LEDs:	System LED Power Per Port LED Link/Act, 100Mbps, FDX/Col
Power Requirement:	AC Line Voltage: 100~240V
Frequency:	50~60Hz
Consumption:	65 Watts
Ambient Temperature:	0° to 50° C
Humidity:	5% to 90%
Dimensions:	45 x 330 x 230 mm (H x W x D)
EMI Rating:	FCC Part 15 Class A and CE Mark

Catalogue entry