|
|
|
|
|
|
|
|
|
| Facts at a glance: |
| Flexible “high end” network controller or highly integrated single chip solution for applications and communication |
| Four communication channels as Real-Time Ethernet or fieldbus interface individually configurable |
| New system architecture optimized for communication and high data throughput |
| 32-Bit/200MHz CPU ARM 926 with 200 MIPs computing power for Windows CE and Linux |
| Dual-port-memory, AD converter and graphic controller on chip |
| Real-Time-Kernel in ROM |
|
|
|
Product
|
NETX 500 for Fieldbus
|
|
|
|
| Description
|
netX 500 Network Controller
|
|
|
|
| Microprocessor
|
|
|
|
| Processor
|
ARM 926EJ-S, 200 MIPS, ARMv5TE-command set with DSP- and Java-extension
|
| Cache
|
16 KByte commands / 8 KByte Data
|
| Tightly coupled memory
|
8 KByte Data
|
| Memory Managment Unit
|
Windows CE- and Linux-Support
|
|
|
|
| Internal memory
|
|
|
|
| RAM
|
144 KByte, of this 16 KByte with external voltage supply
|
| ROM
|
32 KByte with Bootloader and Real-Time-Kernel
|
|
|
|
| Ethernet interface
|
|
|
|
| Ports
|
2 x 10BASE-T/100BASE-TX, Half-/Full-Duplex, IEEE 1588 time stamp
|
| PHY
|
Integrated, Auto-Negotiation, Auto-Crossover
|
| Real-Time-Ethernet
|
EtherCAT with three FMMUs and four Sync-Manager
|
| Ethernet/IP
|
| Powerlink with integrated Hub
|
| PROFINET RT with integrated Switch
|
| SERCOS-III
|
|
|
|
| Fieldbus-Interface
|
|
|
|
| Channels
|
If Ethernet is not used, then two additions fiedlbusses are available. The systems can be combined as desired.
|
| Systems
|
AS-Interface, Master only
|
| CANopen / DeviceNet
|
| InterBus, Master only
|
| PROFIBUS, Master and Slave
|
|
|
|
| Peripherie
|
|
|
|
| Color-LCD-Controller
|
For TFT-panels, Color-STN- and Mono-STN-panels Resolution 320 x 200 to 640 x 480, color depth 1, 2, 4, 8, 16 Bit
|
| Real-Time clock
|
With external voltage supply
|
| IEEE 1588 System Time
|
32 Bit second counter, 32 Bit Nano second counter
|
| USB
|
Revision 1.1, 12 MBaud Full-Speed, Host- or Device-Mode
|
| UART
|
16550 compatible, max. 3 MBaud, RTS/CTS support Quantity 3
|
| I2C
|
| SPI
|
Master- and Slave-Mode, max. 10 MHz, 3 Chip-Select-Signals
|
| AD-Converter
|
2 x 4 Channels with 1MS/s Sample&Hold and 10 Bit-resolution
|
| Single ended, Common Analog Ground, external reference voltage
|
| PWM
|
0–20 kHz/12 Bit-resolution 0–80 kHz/10 Bit-resolution
|
| Encoder
|
2 Channels, Impuls quadruplication, digital input filter
|
| General EAs
|
3.3 V/6 mA Quantity 16
|
| Status LEDs
|
2 LEDs two-colors, 3.3 V/9 mA
|
|
|
|
| Memory-Interface
|
|
|
|
| Memory bus
|
32 Bit-Databus/24 Bit-Address bus
|
| Address region
|
256 MByte SDRAM/64 MByte FLASH
|
| Memory modules
|
SDRAM, SRAM, FLASH
|
|
|
|
| Host-Interface
|
|
|
|
| Dual-port-memory-mode
|
8/16 Bit-Databus, 64 KByte configurable in 8 Blocks, emulated by internal RAM
|
| Extension-Mode
|
8/16 Bit-Databus, 24 Bit-Address bus, Bustiming adjust table
|
| PIO-Mode
|
Freely programmable Inputs and Outputs
|
|
|
|
| Debug-Interface
|
|
|
|
| JTAG
|
ARM-Processor and Boundary-Scan
|
| ETM
|
Embedded Trace Macrocell, ETM9 V2 Medium Size
|
|
|
|
| Operating conditons/housings/various data
|
|
|
|
| System cycles
|
200 MHz ARM / 100 MHz Periphery
|
| Signal level
|
3.3 V
|
| Power supply
|
1.5 V for Core
|
| 3.3 V for Input/Output
|
| Operating temperature
|
without heat sink –40..+70 °C
|
| with heat sink 10°/W –40..+85 °C
|
| Power input
|
PHYs switched off typ. 1.0 W
|
| PHYs switched on typ. 1.5 W
|
| Housing
|
PBGA, 1 mm Raster Pins 345
|
| Dimensions mm 22 x 22
|
|
|
|
|
|
|
