Corman CT-FE517

CorNet 10/100 Fast Ethernet Switch 16TX/1FX with Management

The CT-FE517 is the latest in our family of Fast Ethernet switches. It is a 16 port switch with a port for an optional 2km fiber optic link. Automatic cable detection on each port allows all ports to select 10Mbps or 100Mbps and MDI (crossover) or MDI-X (straight-through) cabling. The built in management interface allows VLAN, QoS, trunking and port configuration. The CT-FE517 remains an affordable solution for your network and includes a full two year warranty.

LAN Interface

10 or 100Mbps transmission rate
Full or half duplex (full duplex required for maximum transmission distances on the fiber optic port)
Switch Type:	Store and Forward
Filtering Rate:	14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
Forwarding Rate:	14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
-QoS:	4 queues per port
Filtering Address:	Multicast/Broadcast/Unicast address 2K MAC addresses per unit
VLAN:	up to 15 VLAN groups
Supports trunking, which allows the connection of multiple ports to other switches to increase bandwidth between switches:	Two-port trunks: Up to 2 trunks Bandwidth: 400 Mbps full duplex per trunk
Management / configuration via built-in RJ-45 serial port (cable provided) and a standard terminal emulator

Operating Environment

Power:	100-240VAC, 50/60Hz, 15W max
Operating Temperature:	0ºC to 50ºC
Storage Temperature:	-40ºC to 70ºC
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Physical Specifications

• Rack or TABLE mountable chassis
• LED indicator for power
• LED indicators for each port showing:

  Link/Act.:	Indicates the link status with a connected device as well as the connection speed between the UTP port and the connected device.
  FDX/Col.:	Indicates the duplex mode and collision occurrences.

• Dimensions:

  430mm x 105mm x 44mm (WxDxH) (16.9" x 4.13" x 1.73")

• 2 years

Fiber Optic Cable

• 62.5/125µm 1300nm multimode fiber optic cable is recommended
• 50/125µm, 85/125µm or 100/140µm 1300nm multimode fiber optic cable can also be used
• Modules available in multimode dual ST connectors (CT-FE052T) or multimode dual SC connectors (CT-FE052C)
• Distance from port to port: 2km (1.25 miles)

Twisted Pair Cable

• Category 5 unshielded twisted pair
• RJ-45 connector
• Distance from port to port: 100m (325 ft)

Twisted Pair Cable

• Category 3, 4 or 5 unshielded twisted pair
• RJ-45 connector
• Distance from port to port: 100m (325 ft)

Catalogue entry