CT-E110
CorNet 10base Ethernet Adapter PCI
|
UTP port (IEEE 802.3 10base-T)
BNC port (IEEE 802.3 10base-2)
AUI port (IEEE 802.3 10base-5) (bracket sold separately)
32 bit PCI bus
PCI PnP jumperless configuration
Supports boot ROM
Drivers for QNX, Netware, Windows, etc.
Diagnostic LEDs for link and activity
+5VDC, 0.6A maximum
|
This industry standard continues to be popular and is a proven solution for basic local area networking. Ethernet's
flexible media types and easy configuration make it a good choice for many applications. The CorNet Ethernet line
is guaranteed to work with QNX.
DESCRIPTION
This is a 32-bit Ethernet Adapter for the PCI bus. It supports jumperless PCI Plug and Play configuration. It
has jacks for unshielded twisted pair or coax connections to the network.
OPERATING ENVIRONMENT
- Power: +5V DC @ 0.5A max, +12V DC @ 250mA max.
- Operating Temperature: 0 to 50ºC
- Storage Temperature: -40 to 70ºC
- Operating Humidity: 10% to 80% (non-condensing)
- Storage Humidity: 5% to 90% (non-condensing)
LAN INTERFACE
- PCI bus (PCI specifications revision 2.0)
- 10Mbps transmission rate
- I/0 mapped (Set from PCI system BIOS)
- Interrupts (Set from PCI system BIOS)
- Optional Boot ROM available
- Jumperless configuration via PCI system BIOS
- Autodetect BNC or UTP interface
- Drivers for most popular networking operating systems
PHYSICAL SPECIFICATIONS
- PCB mounted low profile RJ45 and BNC Connectors
- LED indicator for link and activity status
- Dimensions: 154mm x 76mm (6"x3")
- Optional AUI connector bracket available
WARRANTY
INSTALLATION CONSIDERATIONS
Twisted Pair Cable Type
- Category 3 or better unshielded twisted pair
Twisted Pair Distances
-
From node to hub: 100m (325 ft)
Total network span: 500m (1320 ft)
Based on recommended maximum of 5 links and 4 repeaters between nodes.
Coax Cable type
Thin coaxial cable: RG-58A/U 50ohm coaxial cable (0.2 inch diameter)
Coax Distances
Maximum Segment length: 185m (600 ft)
Minimum Segment length: 0.5 m (1.6 ft)
Other Coax Considerations
Maximum number of coax segments between nodes: 5
Maximum number of nodes per coax segment: 30
BNC 50ohm terminator required at each end of trunk and one must be grounded
CONFORMS TO THE FOLLOWING STANDARDS
-
Ethernet: IEEE 802.3 10base-T and 10base-2
EMC:
- EN55022:1994, CISPR 22 Class A
- EN50082-1
- IEC 801-2, 8KV Air
- IEC 801-3, 3V/m
- IEC 801-4, 0.5KV Signal line, 1KV Power line
 Catalogue entry
|
