CT-E050T/CT-E050C
CorNet Ethernet Multimode Media Converter
DESCRIPTION
The CT-E050T and the CT-E050C media
converters change an Ethernet 10base-T
copper wire based signal to a 10base-FL
multimode fiber optic based signal.
When used in a point-to-point full
duplex connection, the converter extends the
distance of Ethernet network links to a maximum of
2km using multimode fiber cable. Users can
select from either ST or SC connectors.
OPERATING ENVIRONMENT
|
Power:
|
+12VDC @ 800mA min
|
|
Operating Temperature:
|
0ºC to 40ºC
|
|
Storage Temperature:
|
-40ºC to 70ºC
|
|
Operating Humidity:
|
10% to 90% (non-condensing)
|
|
Storage Humidity:
|
5% to 90% (non-condensing)
|
LAN INTERFACE
|
10Mbps transmission rate
|
|
10base-T: RJ-45 connector
|
|
10base-FL: ST or SC multimode connector
|
PHYSICAL SPECIFICATIONS
|
PCB mounted fiber optic ST or SC module
|
|
LED indicator for power
|
|
LED indicators for link
|
|
UTP:
|
indicates 10base-T link is established
and activity on port
|
|
FX:
|
indicates 10base-FL link is established
and activity on port
|
|
Dimensions:
|
101mm x 96mm x 25mm (WxDxH)
3.98” x 3.78” x 0.98”
|
WARRANTY
2 years
INSTALLATION CONSIDERATIONS
10 base-FL ETHERNET
Fiber Optic Cable
-
62.5/125µm 850nm multimode fiber optic cable is recommended
- Dual ST or SC connectors
- Distance from port to port: 2km (1.25 miles)
10 base-T ETHERNET
Twisted Pair Cable Type
- Category 5 unshielded twisted pair
- Distances From node to hub: 100m (325 ft)
- RJ-45 connector
CONFORMS TO THE FOLLOWING STANDARDS
|
10base-T:
|
IEEE 802.3 10base-FL
IEEE 802.3 10base-T
|
|
EMC:
|
EN 50081-1:1992
|
EN55022:1998
EN61000-3-2:1995
EN61000-3-3:1995
|
CISPR 22:1997
IEC1000-3-2:1995
IEC1000-3-3:1994
|
|
EN 50082-1:1997
|
EN61000-4-2:1995
EN61000-4-3:1996
EN61000-4-4:1995
|
IEC 61000-4-2:1995
IEC 61000-4-3:1995
IEC 61000-4-4:1995
|
|
Products are marked as certified to the CE standards
|
 Catalogue entry
|
