Blue Heat/Net 2

FeaturePak

The Xtreme/FP board uses the small module form factor of the FeaturePak specifi cation. It is designed to add four high speed serial ports to your FeaturePak compatible baseboard or single board computer. It also allows you to use 16 bits of custom confi gurable digital I/O to expand functionality, control and communicate to different devices. Xtreme/FP can be used for a wide range of embedded applications. What is FeaturePak? A new and exciting embedded system expansion standard. FeaturePak is a mezzanine-style standard designed to work with existing standards such as PC/104, SUMIT, Qseven, ETX, XTX, COM Express, etc. FeaturePak modules are smaller than a credit card at 42mm x 65mm in size and make use of a low-cost connector to integrate all host and external I/O interfaces. Using FeaturePak allows you to reconfi gure your system design using off the shelf modules based on an open standard that will ensure a strong eco-system.
Features:
Compatible with any FeaturePak host board 4 Ports RS-232 PCI Express UART 256 bytes of transmit and receive FIFO buffers Automatic hardware and software fl ow control Speeds of up to 1Mbps 16 digital IO or timer/counter functionality (5V or 3.3V selectable) Primary and secondary FeaturePak IO groups utilized
Number of Ports	4
Electrical Interface	RS-232
Control Signals	TX, RX, RTS, CTS, DTR, DCD, DSR, RI
Connectors	None, IO connected to FeaturePak IO Pins
Baud Rate	1 Mbps
UART Type	17V358 PCIe UART with up to 256 bytes of transmit and receive FIFO buff ers for each port
Dimensions	2.550” x 1.7”
Temperature	-40º C to 85º C (-40º F to 185º F)
Bus	FeaturePak
Software Compatibility	Windows/Linux/QNX
System Requirements	FeaturePak Baseboard
Power Consumption	500mA
Additional I/O	16 Digital IO (5V or 3.3V selectable)
Warranty and Support	Lifetime warranty and free technical support