|
|
|
|
SGM7000
|
*** DISCONTINUED; REPLACED BY MCR0002+CGM420 *** 1000Base-SX/LX To 10/100/1000Base-T Managed Media Converter
ADDITIONAL FEATURES
Supports auto shutdown when temperature reaches too high and cooling system fails
Supports Broadcast Suppression and Broadcast Storm Filtering
Supports QoS (eight levels, 0 to 7)
Supports VLAN PVID tagged or untagged setup for each port
Programmable maximum Ethernet frame length of 1522 or 1536 bytes
Supports STP (IEEE 802.1D) and RSTP (IEEE 802.1W)
Supports MAC address filtering - Denial Forwarding and Allowed Forwarding
Supports Web-based (WebUI) and Text-based (ConsoleUI) management user interface
Allows management traffic through fiber side only, i.e. all SNMP functionalities cannot be accessed via TP (RJ-45) port
Supports up to 4 Traps Hosts
Support E-mail client (SMTP RFC821) and mobile phone short message (SMS) up to six staffs to receive e-mail and/or alarm messages
|

|
TECHNICAL SPECIFICATIONS
- Model:
SGM7000SC / SGM7000LC
SGM7000SC10 / SGM7000SC40 / SGM7000SC70
SGM7000BD3.20 / SGM7000BD5.20
- Standards:
IEEE 802.3z 1000Base-SX/LX, 802.3ab 1000Base-T, 802.3u 100Base-TX, 802.3 10Base-T
- Protocol Supported:
IEEE 802.3D Spanning-Tree Protocol, IEEE 802.3W Rapid Spanning-Tree Protocol, UDP RFC768, TFTP RFC783, IP RFC791, ICMP RFC792, TCP RFC793, ARP RFC826, Telnet RFC854, NTP RFC1305, HTTP RFC2068, DHCP RFC2131/RFC2132, SMTP RFC821
- Network Management:
Public & Private MIBs
RFC1213 MIB (MIB-II), System MIB, Interface MIB, Address Translation MIB, IP MIB, ICMP MIB, TCP MIB, UDP MIB, SNMP MIB, RFC1757 RMON MIB (Statistics Group 1, History Group 2, Alarm Group 3, Event Group 9), RFC1643 Ethernet MIB, & Enterprise MIB (private)
In-Band
Web Browser, SNMP, Telnet
Out-Band
RS-232 Console
- VLAN Supported: Tag-based
- Connectors:
Front Panel
SGM7000SC — 850nm Multi-Mode Duplex-SC & RJ-45
SGM7000LC — 850nm Multi-Mode Duplex-ST & RJ-45
SGM7000SC10 — 1310nm Single-Mode/10km Duplex-SC & RJ-45
SGM7000SC40 — 1550nm Single-Mode/40km Duplex-SC & RJ-45
SGM7000SC70 — 1550nm Single-Mode/70km Duplex-SC & RJ-45
SGM7000BD3.20 — 1310nm (TX) Single-Mode/20km Simplex-SC & RJ-45
SGM7000BD5.20 — 1550nm (TX) Single-Mode/20km Simplex-SC & RJ-45
[ RJ-45 can do auto MDI/MDI-X selection ]
Rear Panel
RS-232 DB-9 Male
[ Settings: Baud 57600, Data 8, Stop 1, Parity N, Flow NONE ]
- Flash Memory: 4MB
- CPU Main Memory: 16MB
- MAC Address and Self-learning: 2K
- Packet Buffer Memory: Up to 48K
- dBm [ Max RX Input Sensitivity, Output Power ]:
SGM7000SC [ n/a ]
SGM7000LC [ n/a ]
SGM7000SC10 [ -9.5dBm, -3dBm, -21dBm, 11.5dB ]
SGM7000SC40 [ -6dBm, 0dBm, -23dBm, 17dB ]
SGM7000SC70 [ 0dBm, 5dBm, -23dBm, 23dB ]
SGM7000BD3.20 [ -8dBm, -3dBm, -21dBm, 13dB ]
SGM7000BD5.20 [ -8dBm, -3dBm, -21dBm, 13dB ]
- Data Transfer Rate:
1000Mbps for SX/LX
1000, 100 or 10Mbps (auto-negotiation or software selectable) for TP
- Duplex Mode:
Full for 1000Base-SX/LX/T
Full or Half (auto sense or software selectable) for TP
- Flow Control: IEEE 802.3x for Full Duplex, Back-pressure for Half Duplex
- Cables / Max Distance:
Category 5 or above UTP, up to 100m
50/125, 62.5/125µm Multi-Mode fiber, up to 220m
9/125µm Single-Mode fiber, up to
10km for SGM7000SC10
20km for SGM7000BD3.20/ SGM7000BD5.20
40km for SGM7000SC40
70km for SGM7000SC70
- LEDs:
Unit — POWER
Fiber Port — LINK/ACT
TP Port — 1000, ACT, FDX/COL
- Power Requirement: 3A@+5V DC, max 13W consumption
- External Power Adapter: 100~240V AC, 50~60Hz, 0.5A
- Operating Temperature: 0° to 50° C
- Humidity: 5% to 90%
- Dimension: 44 x 96 x 141mm (H x W x D), Metal Case
- EMI Rating: FCC Class A, CE Mark Approval
- Warranty: 1-Year Limited Hardware, 90-Day Software
Catalogue entry
|
|
|