|
|
|
|
Relio R1300, 500MHz AMD Geode™ LX800 Embedded Computer
|
SEALEVEL R1300
Relio R1300 Industrial Computer |
|
| |
The Relio R1300 delivers the processing power of a desktop computer, yet is small enough to be mounted virtually anywhere. The system is housed in a compact, rugged metal enclosure with the same footprint as Sealevel SeaI/O modules. Powered by a 500MHz AMD Geode LX800 CPU, the R1300 system offers low power consumption and operates over a wide temperature range. Standard I/O features include two 10/100BaseT Ethernet, four USB, 8 bit GPIO, a parallel printer port and four serial ports. The R1300 is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.
The R1300 can operate from CompactFlash and is supported by either XP Embedded or embedded Linux operating systems. For applications that require disk storage, order one of the high-temperature hard drive options listed below. Optional brackets allow for versatile mounting to walls, under counters, on tabletops, or even to DIN rails.
Local or remote I/O expansion is available using Sealevel SeaI/O modules. Choose from a variety of I/O configurations including optically isolated inputs, Reed and Form C relay outputs, TTL interfaces, A/D, and D/A. The unit connects to SeaI/O modules via the system's RJ45 port and communicates using RS-485 Modbus RTU.
|
|
| Technical Specifications |
| Processor
|
500MHz AMD Geode LX800
|
| SDRAM
| Up to 1GB
|
| Power Requirement
| 9-30 VDC @ 18.0W
|
| Operating Temperature
| 0 - +50°C
|
| Extended Temperature
| Call for Options
|
| Storage Temperature
| -10° - +60°C
|
| Humidity Range
| 10 - 90% R.H.
|
| Dimensions
| 7.5" (L) x 5.1" (W) x 1.8" (H)
|
| Weight
| ~2 lbs
|
Features:
- Embedded 500MHz AMD Geode LX800 CPU
- Solid-state operation using internal CompactFlash® memory
- CompactFlash module is accessible without opening the enclosure
- Up to 1GB RAM (DDR PC2700 200-Pin SODIMM, 333 MHz, Non-ECC)
- Two 10/100BaseT RJ45 Ethernet ports
- RJ45 Modbus RTU RS-485 pass-through port (supports N-series SeaI/O expansion modules)
- Four DB9M serial ports (COM1, 3, 4 = RS-232, COM2 = RS-232/422/RS-485)
- COM2 defaults to 2-wire RS-485 and can be accessed via DB9M or RJ45 pass-through connectors
- Four high-speed USB 2.0 ports
- One DB15 UXGA Analog video connector (supports 1600x1200 @ 100Hz and 1920x1440 @ 85Hz)
- One PS2 port for keyboard and mouse (includes Y-cable)
- One DB25F parallel printer port
- Stereo audio out via standard 1/8” speaker connector
- System power via modular connector
- 6-position screw terminal for optional system power and RS-485 2-wire interface
- 8 Bits of general purpose I/O (GPIO) available on 10-position removable screw terminal
 Catalogue entry
|
|
|
|
