|
| Comtrol’s RocketLinx ES7506 product is designed for industrial PoE applications such as IP surveillance or wireless access points, where the power source is not conveniently located.
|
|
|
|
| The RocketLinx ES7506 supports intelligent PoE control and schedule management. Each of the four PoE ports can be configured in a weekly schedule by hourly basis and PoE on/off can be remotely controlled via SNMP and Web.
|
|
|
|
| It is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus designed for boosting PoE delivery up to 30W in each of the four PoE ports. The RocketLinx ES7506 can auto-detect 24V and 48V power input and can deliver 24V and 48V PoE outputs which allow more applications where 48VDC is not an option.
|
|
|
|
| The two uplink ports can be configured as Redundant Ring ports recovering network failure in less than 5ms, or RSTP ports integrating with other standard switches. Full network management features such as SNMP v3, QoS, IGMP v3 are all supported. If the powered device fails to respond after a pre-configured time interval, the product will reboot the powered device and continue to monitor the powered device in every pre-configured time interval. Also, unmanageable powered devices can be managed through the RocketLinx switch.
|
|
|
|
| The IP-31 rigid aluminum flat casing and wide operation temperature range ensure reliable operation in places such as mass transit vehicles or outdoor usage.
|
|
|
|
Hardware
|
|
|
Bus Interface Specification
|
10/100/100BASE-TX
|
|
Enclosure
|
IP-31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
|
|
Installation
|
Panel Mount or DIN-Rail Mount
|
|
LED Indicators
|
Power 1, Power 2, Ring Master (R.M.)
10/100Base-TX Link/Activity Alarm
PoE Status
|
|
Dimensions
|
6.4" x 1.75" x 5.35"
|
|
Product Weight
|
1.44 lbs
|
Technology
|
|
| Standards |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-T
IEEE802.1p Class of Service
IEEE802.3af Power Over Ethernet (PoE)
IEEE802.3at High Power PoE
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
|
| Flow Control |
IEEE802.3x Flow Control and Back Pressure
|
Performance
|
|
| Switch Technology |
32Gbps Switch Fabric
Store and Forward Switch Technology
|
| System Throughput |
14,880pps for 10Mbps
148,880pps for 100Mbps |
| Number of MAC Address |
2K |
| Packet Buffer Memory |
1Mbits
|
| Transfer Packet Size |
64 - 1552 Bytes (with port based VLAN)
|
| Priority Queues per Port |
4
|
| PoE Technology |
End-Span wiring architecture
PD classification detection, class ID 0~3 follow IEEE802.3af standard, and 30W High power deliver procedures for class ID 4.
Pin assignment: V+ (RJ-45 Pin 4,5), V- (RJ-45 Pin 7,8), TX (RJ-45 Pin 1,2), RX (RJ-45 Pin 3,6)
Protection: Provides over-current protection by PD class ID |
Management Features
|
|
| Configuration |
NetVision Utility, HTTP, HTTPS, SSH, SNMP V1/V2C/V3, Traps, Web
Browser, CLI Management, Admin Password, DHCP Client, status,
Scheduling, TFTP/HTTP/NetVision update for firmware
|
| Management Security |
4 entries for web, telnet, SNMP management security
|
| SNMP Trap |
Provides Cold start, Warm start, Port event, Power event,
Authentication failure, PoE trap and private trap for
proprietary functions
|
| SNMP MIB |
RFC 1213 MIBII, RFC 1493 Bridge MIB, RFC 1757 RMON MIB, RFC
2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC1215 Trap MIB,
RFC 3621 Power Ethernet MIB, Private MIB
|
| Firmware upgrade |
TFTP, HTTP and NetVision
|
| System Log |
1000 system entries for system or remote log server
|
| Event Alarm Relay |
Relay alarm for Port link down, PoE, and system power events
|
| Quality of Service |
Quality of Service determined by port, Tag and IPv4 Type of Service
|
| Class of Service |
IEEE802.1p class of service, with 4 priority queues
|
| DHCP |
DHCP Cilent and Server function with specified IP exclusion and
MAC binding function
|
| Timer |
Supports Network Time Protocol (NTP) to synchronize time from
NTP Server
|
| VLAN |
Port based VLAN |
| IGMP Snooping |
Supports IGMP Snooping v1/v2/v3 and IGMP Query v1/v2
|
| IP Security |
IP security to prevent unauthorized access
|
Network Redundancy
|
|
| Rapid Spanning Tree Protocol (RSTP) |
IEEE802.1D-2004 STP and RSTP
IEEE802.1w Rapid Spanning Tree Protocol (RSTP)
|
| Redundant Ring |
Failure recovery in less than 5ms
|
| Rapid Dual Homing (RDH) |
Inter-operational with higher level switches and RSTP
protocol compliant
|
PoE Features
|
|
| Standards |
|
| IEEE802.3af |
Power Over Ethernet
|
|
IEEE802.3at
|
High Power PoE
|
| Number of PoE Injector Ports |
4 |
| Maximum Power/PoE Port (Max.) |
|
| 12.9W @ VIN (Non-Standard PoE mode) |
24VDC
|
|
15.4W @ VIN (IEEE802.3af mode)
|
48VDC
|
| 30W @ VIN (IEEE802.3at mode) |
55VDC
|
| Total Power Budget |
Up to 100W (IEEE802.3at)
|
| Standard PoE Voltage Output |
IEE802.3af compliant
44-57VDC
|
| Non-Standard PoE Voltage Output |
24VDC |
| PoE Control |
User-configuration for PoE enable, disable, or schedule-based
PoE function
|
| Smart Powered Device Alive-Check |
User-configuration to monitor real-time status of connected PD’s. PoE port is reset to bring a PD back to working state, if connected PD fails
|
|
Real-time Status on Web Interface
|
Real-time status on port status, PoE status, PD Status
|
| Forced Powering |
Advanced feature to supply power to non-standard PoE devices
that can’t be detected as valid PD’s
|
|
Power Limit Control
|
Standard mode for IEEE802.3af PD
Manual mode for user-configuration of power limit to
IEEE802.3af standard PD
Ultra mode for user-configuration to perform at the 30W
power imitation or forced powering mode for non-standard PD
|
|
PoE Schedule Control
|
PoE ports are configurable as on/off by hourly/weekly basis. Each
PoE port can be scheduled to activate/deactivate PoE power with
different rule using web interface
|
Electrical Specifications
|
|
| Device |
|
| DC Input Voltage |
24-55 VDC
|
| Current Consupmtion without PD Load |
|
| +24VDC |
330mA |
| +48VDC |
170mA |
| Power Consupmtion (max.) |
8W (without PD load) |
| Power Connector |
1 |
| Power Connector Type |
6-Pin Screw Terminal Block |
| Power Input Redundancy |
Dual Redundant Independent Power Inputs |
| Reverse Polarity Protection |
Yes |
| Power Alarm Relay |
Alarm for power failure notification |
| Relay Rating |
1A Max. @ 24VDC |
Environmental Specifications
|
|
| Air Temperature |
|
| System On |
-20° to 60° C
|
| System Off |
-40° to 85° C
|
| Operating Humidity (non-condensing) |
5% to 95%
|
| MTBF (Mean Time Between Failures) |
37 years
|
Ethernet Specification
|
|
| Connector Type |
RJ-45 |
| Number of Ports |
4 x 10/100Base-TX with
PoE Injector; 2 x 10/100Base-TX
|
| Ethernet Cable Type |
CAT-3, CAT-4, CAT-5, CAT-5e, CAT-6 (UTP or STP)
|
| Link Distance |
100 Meters |
| Port Alarm Relay |
Alarm Relay for Port Failure Notification |
| Relay Rating |
1A Max. @ 24VDC |
Serial Console Port Specification
|
|
| Connector Type |
RJ-45 |
| Number of Ports |
1 |
| Serial Interface |
RS-232 (TXD, RXD, Signal GND) |
| Baud Rate |
9600Bps |
| Device Data Control |
|
| Data Bits |
8 |
| Parity |
None |
| Stop Bits |
1 |
| Flow Control |
None |
Export Information
|
|
| Packaged Shipping Weight |
2.14 lbs |
| Package Dimensions |
10.1" x 7.0" x 3.6" |
| UPC Code |
7-56727-32050-0 |
| ECCN |
5A991 |
| Schedule B Number |
8517.62.0050 |
Regulatory Approvals
|
|
| Emissions |
Canadian EMC Requirements
ICES-003
European Standard EN55022
CISPR 22
FCC Part 15 Subpart B
Class A limit
|
| Immunity |
European Standard EN55024:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/ Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
IEC 1000-4-6/EN61000-4-11: DIPS and Voltage Variations
|
| Saftey |
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
|
| Other |
European Standard: 2002/95/EC Directive (RoHS)
|
