|
The Communication Interface as a Master on the CANopen network exchanges independently the data between
the devices on the bus and the internal process image. The process image is held in the dual-port memory
and the application can access the data directly.
The configuration is carried out with the aid of our System Configurator SyCon® or directly from the
application program. It is stored in the device and is available immediately at the start time.
The Slave devices are configured by the Master via the CANopen network via SDO. With it only the relevant
data in the process image is passed to or is taken from the application.At runtime the application has
the possibility to send SDO telegrams to the node.
|
| |
|
| |
| Facts |
| Execution of the CANopen protocol stack without load of the PC
|
| Direct access to the process data in the dual-port memory
|
| Easy diagnostic via LED status display
|
| Configuration data is stored in internal FLASH memory
|
| Graphic System Configurator with unified 'look and feel' for all fieldbus systems
|
| Identical 'easy-to-use' application interface on all Communication Interfaces
|
| Device driver for Windows® and Linux included
|
| OPC server available |
| |
| Product |
CIF 104P-COS |
| Option |
Connector |
| DSub 9-pin |
| Square post 10-pin angled | \P |
| Square post 10-pin straight | \S |
| Square post 16-pin angled | \H |
| Square post 16-pin straight | \V |
| Description |
Communication Interface PC/104 |
| CANopen-Master |
| connector right |
| In scope of delivery |
C functions library DRV-TKIT |
| COM interface DRV-COM |
| Device driver Windows DRV-WIN |
| Device driver Linux DRV-LNX |
| Documentation on CD CD-SYS |
| Basic version System Configurator |
| Related products |
SoftPLC-Kit |
| OPC-Server SRV-OPC |
| Service cable CAB-SRV |
| Flat ribbon cable CAB-PM |
| only for option \P \S |
Assembly Interf. AIF 104-DIAG-RY-R |
| Card format |
PC/104Plus |
| Bus Interface |
PCI |
| Dual-port memory |
8 KByte |
| Interrupt |
plug and play |
| CANopen interface |
CiA DS-102 |
| Transmission rate |
10 kBaud to 1 MBaud |
| Controller |
EC-1 |
| Interface |
ISO 11898, optically isolated |
| Connector |
DSub-male connector 9-pin |
| Square post 10-pin angled \P \H |
| Square post 10-pin straight \S \V |
| Diagnostic interface |
RS232C, non-isolated |
| Connector |
DSub-male connector 9-pin |
| Square post 10-pin angled \P |
| Square post 10-pin straight \S |
| Square post 16-pin angled \H |
| Square post 16-pin straight \V |
| Display |
RDY, RUN, STA, ERR |
| Operating voltage |
5 V +5% / 50 mA |
| 3,3 V +5% < 400 mA |
| Operating temperature |
0 °C - 55 °C |
| Dimensions (L x W x H) |
90 x 96 x 25 mm |
| Weight approx. |
120 g |
| CE sign |
Yes |
