| The Communication Interface as a Master on the PROFIBUS network exchanges independently the
data between the devices on the bus and the internal process image. The process image is held in the
dual-port memory and the application can access the data directly.
The configuration is carried out with the aid of our System Configurator SyCon® or directly from the
application program. It is stored in the device and is available immediately at the start time.
The Slave devices are configured by the Master via the PROFIBUS network. With it only the relevant data in
the process image is passed to or is taken from the application.
|
| |
|
| |
| Facts
|
| Execution of the PROFIBUS protocol stack without load of the PC |
| Direct access to the process data in the dual-port memory |
| Easy diagnostic via LED status display |
| Configuration data is stored in internal FLASH memory |
| Graphic System Configurator with unified 'look and feel' for all fieldbus systems |
| Identical 'easy-to-use' application interface on all Communication Interfaces |
| Device driver for Windows® and Linux included |
| OPC server available |
| |
| Product |
CIF 104-PB-R |
| Option |
Connector |
| DSub 9-pin |
| Square post 10-pin angled | \P |
| Square post 10-pin straight | \S |
| Square post 16-pin angled | \H |
| Square post 16-pin straight | \V |
| Description |
Communication Interface PC/104 |
| DP-Master |
| connector right |
| In scope of delivery |
C functions library DRV-TKIT |
| COM interface DRV-COM |
| Device driver Windows DRV-WIN |
| Device driver Linux DRV-LNX |
| Documentation on CD CD-SYS |
| Basic version System Configurator |
| Order seperately |
System Configurator SYCON-PB |
| Related products |
Device driver Windows CE DRV-CE |
| SoftPLC-Kit |
| OPC-Server SRV-OPC |
| Service cable CAB-SRV |
| only for option \P \S |
Flat ribbon cable CAB-PM |
| Assembly Interf. AIF 104-PB-DIAG-R |
| only for option \H \V |
Assembly interface AIF 104-DIAG-RY-R |
| Card format |
PC/104 |
| Bus Interface |
ISA |
| Dual-port memory |
8 KByte |
| Interrupt |
3-7, 9-12, 14, 15 |
| PROFIBUS interface |
EN 50 170 |
| Transmission rate |
9,6 kBaud to 12 Mbaud |
| Controller |
ASPC2 |
| Interface |
RS485, optically isolated |
| Connector |
DSub-female connector 9-pin |
| Square post 10-pin angled \P \H |
| Square post 10-pin straight \S \V |
| Diagnostic interface |
RS232C, non-isolated |
| Connector |
DSub-male connector 9-pin |
| Square post 10-pin angled \P |
| Square post 10-pin straight \S |
| Square post 16-pin angled \H |
| Square post 16-pin straight \V |
| Display |
RDY, RUN, STA, ERR |
| Operating voltage |
5 V ±5% / 650 mA |
| Operating temperature |
0 °C - 55 °C |
| Dimensions (L x W x H) |
90 x 96 x 25 mm |
| Weight approx. |
120 g |
| CE sign |
Yes |
