| The FE-517 is the latest in our family
of Fast Ethernet switches. It is a 16
port switch with a port for an optional
2km fiber optic link. Automatic cable
detection on each port allows all ports
to select 10Mbps or 100Mbps and
MDI (crossover) or MDI-X (straightthrough)
cabling. The built in
management interface allows VLAN,
QoS, trunking and port configuration.
The CT-FE517 remains an affordable
solution for your network and includes
a full two year warranty.
|
| Switch Features
|
| 10 or 100Mbps transmission rate
|
| Full or half duplex (full duplex required for maximum transmission distances on the fiber optic port)
|
| Switch Type: Store and Forward
|
| Filtering Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
|
| Forwarding Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
|
| QoS: 4 queues per port
|
| Filtering Address: Multicast/Broadcast/Unicast address 2K MAC addresses per unit
|
| VLAN: up to 15 VLAN groups
|
| Supports trunking, which allows the connection of multiple ports to other switches to increase bandwidth between switches:
|
| -Two-port trunks: Up to 2 trunks
|
| -Bandwidth: 400 Mbps full duplex per trunk
|
| Management / configuration via built-in RJ-45 serial port (cable provided) and a standard terminal emulator
|
|
|
|
| Operating Environment
|
| Power:
|
100-240VAC, 50/60Hz,15W max
|
| Operating Temperature:
|
0ºC to 50ºC
|
| Storage Temperature:
|
-40ºC to 70ºC
|
| Operating Humidity:
|
10% to 90% (non-condensing)
|
| Storage Humidity:
|
5% to 95% (non-condensing)
|
|
|
|
| Available Fiber Modules
|
| FESM-517-MT Multi-mode with ST connector
|
| FESM-517-MC Multi-mode with SC connector
|
| FESM-517-SC Single-mode with SC connector
|
|
|
|
| Physical Specifications
|
| Rack or Table mountable chassis
|
| LED indicator for power and for each port
|
| Link/Act.: |
Indicates the link status with a connected device as well as the connection speed between the UTP
port and the connected device.
|
| FDX/Col.: |
Indicates the duplex mode and collision occurrences.
|
| Dimensions:
|
430mm x 105mm x 44mm (WxDxH) (16.9" x 4.13" x 1.73")
|
|
|
|
| Conforms to the Following Standards
|
| LAN: |
IEEE 802.3u 100base-TX
|
| IEEE 802.3u 100base-FX
|
| IEEE 802.3 10base-T
|
| EMC: |
EN55022 IEC1000-4-2
|
| EN60555-2 IEC1000-4-3
|
| EN60555-3 IEC1000-4-4
|
| Products are marked as certified to the CE and FCC standards.
|
|
|
|
| Installation Considerations
|
| 100FX FAST ETHERNET
|
| Fiber Optic Cable |
62.5/125µm 1300nm multimode fiber optic cable is recommended
|
| 50/125µm, 85/125µm or 100/140µm 1300nm multimode fiber optic cable can also be used
|
| Modules available in multimode dual ST connectors (CT-FE052T) or multimode dual SC connectors (CT-FE052C)
|
| Distance from port to port: 2km (1.25 miles)
|
|
|
|
| 100TX FAST ETHERNET
|
| Twisted Pair Cable |
Category 5 unshielded twisted pair
|
| RJ-45 connector
|
| Distance from port to port: 100m (325 ft)
|
|
|
|
| 10base-T ETHERNET
|
| Twisted Pair Cable |
Category 3, 4 or 5 unshielded twisted pair
|
| RJ-45 connector
|
| Distance from port to port: 100m (325 ft)
|
|
|
|
| Warranty
|
2 years
|
