| The FE-124 100TX Fast Ethernet
Adapter CPI is a 32-bit LAN adapter
for use in personal computers with a
Peripheral Component Interconnect
(PCI) computer bus.
This adapter is a dual-speed adapter
and features a single connector for
either a 10magabits per second
(10Mbps) or a 100 megabits per
second (100Mbps) IEEE 802.3u
Ethernet network connection over
unshielded twisted-pair (UTP) cable.
The adapter can automatically
negotiate the connection type and
switch to either 10 Mbps or 100
Mbps, full or half duplex.
|
| Adapter Features
|
| High performance bus master operation with low processor utilization
|
| Boot ROM socket (QNX 4 Boot ROM available)
|
| Automatically senses 10 Mbps or 100 Mbps connection and configures the speed accordingly
|
| PCI revision 2.1 compliance, 32-bit PCI half-card
|
| Status LED indicates link up
|
| 100base-TX connection with UTP Category 5 cabling
|
| 10base-T connection with UTP Category 3,4, 5 cabling
|
| Auto negotiation or software configurable to operate in full-duplex mode, increasing aggregate bandwidth up to 20 Mbps and 200 Mbps
|
| QNX 4 network driver on the adapter driver diskette
|
|
|
|
| Operating Environment
|
| Power:
|
+3.3VDC @ 378mA max.
|
| Operating Temperature:
|
0ºC to 50ºC
|
| Storage Temperature:
|
-25ºC to 70ºC
|
| Operating Humidity:
|
10% to 70% (non-condensing)
|
| Storage Humidity:
|
10% to 90% (non-condensing)
|
|
|
|
| Physical Specifications
|
| PCB mounted low profile RJ-45 connector
|
| LED indicator: link status
|
| Dimensions: 120mm x 58mm (4.72" x 2.28")
|
|
|
|
| Warranty
|
2 years
|
|
|
|
| ETHERNET
|
| Twisted Pair Cable
|
Category 3 or better unshielded twisted pair |
| Distance from node to hub: 100m (325 ft)
|
| Total network span: 500m (1320 ft) Based on recommended maximum of 5 links and 4 repeaters
between nodes.
|
|
|
|
| FAST ETHERNET
|
| Twisted Pair Cable
|
Category 5 unshielded twisted pair
|
| Distance from node to hub: 100m (325 ft)
|
| Total network span: 205m (670 ft)
|
